FARAZSIL SUPER290 | Powerful Protection and Hydrophobic Treatment for Porous to Non porous Materials

• Strong reduction in water uptake
• Excellent water repellency and consequently:
Salt barrier (e.g. road salt and sea water)– chlorides dissolved in water are blocked
No corrosion – the reinforcing steel does not rust since no moisture reaches it
No frost damage – greater resistance to freeze/thaw cycles
• FARAZSIL® NFS SUPER 290 provides a comprehensive and long-lasting protection of construction materials against water intrusion, efflorescence and destruction by water-soluble pollutants as well as against frost damage and attack of micro-organisms.
• Excellent depth of penetration. Due to its high penetration ability, FARAZSIL® NFS SUPER 290 can impregnate the substrate in depth and create a protective barrier against rain for a long time.
• FARAZSIL® NFS SUPER 290 does not create a membrane or alter the appearance of the surface; it does not shine, but allows the structural member to breathe.
• The FARAZSIL® NFS SUPER 290 impregnated surface remains clean because the rainwater does not penetrate the pores, but is repelled, carrying away any stuck dust.
• Does not influence water-vapor permeability
• It minimizes the appearance of salts and damages caused by frost that is frequent in wetted surfaces.
• Excellent chemical resistance
• Resistance to UV radiation
• Does not render shiny, tacky, or yellowish surfaces.

FARAZSIL® NFS SUPER 290 is appropriate for non-absorbent and smooth surfaces such as painted and unpainted metals and stones with low absorption, such as marble, granite and travertine. FARAZSIL® NFS SUPER 290 is suitable for imparting water repellency to absorbent, porous, mineral building materials. E.g.:
• All kinds of concrete
• Mineral plasters
• Cement Fibreboards
• Sand lime brickwork
• Brickwork
• Aerated concrete
• Mineral-based natural and artificial stone
• Mineral Paints

Deposition method of this coating on various surfaces is by using sprayers or brushes. The coating method of this product is quite simple, easy, economical and practical.
Before coating, any contaminants, like grease and dust,  must be cleaned from the surface.
Old and flaky paint (if any) must be removed from the surface through sanding before coating the surface.
Stir the bucket or drum before using. 
FARAZSIL® NFS SUPER 290 is ready to use. Apply several coats, wet on wet, until the substrate is saturated. Generally, at least two applications will suffice for all substrates.

Deposition method of this coating on various surfaces is by using the spray or brushes. The coating method of this product is quite simple, easy, economical and practical.
Before coating, the surface must be cleaned from grease and dust.
Old and flaky paint (if any) must be removed from the surface through sanding before coating the surface.
Stir the bucket or drum before using