Product Name NFS-104 NFS-2028IMP Nano- Glass EC-211 Nano Wood -EC-311 FARAZSIL® NFS 290 FARAZSIL® NFS 290 SUPER BIOCLEAN – 331 BIOCLEAN -331PLUS
What surface is this product suitable for use?
  • Brick
  • Wood
  • Painted wall
  • Cement
  • Concrete
  • Thatch
  • Plaster
  • Painted metal (in industrial sheds to prevent the adhesion of soot and grease and metal particles suspended in the air
  • Any surface that needs anti-stain and anti-graffiti properties along with hydrophobicity and oil repellency.
  • White brick
  • Absorbent, porous and mineral construction
  • materials
  • Concrete
  • Cement
  • creating water repellence and waterproof in porous materials
  • Glass surfaces
  • Glass facades
  • Painted wooden surfaces such as bathroom doors;
  • Raw wood and unpainted wood surfaces;
  • Thermo-wood;
  • MDF
  • Chipboard
  • Brick surfaces
  • Concrete surfaces
  • Absorbent, porous and mineral construction materials
  • Low absorption surfaces
  • Stone surfaces
  • Painted surfaces
  • Masonry cleaner and efflorescence Remover for all building surfaces
  • All construction and industrial surfaces that need to remove soot, grease, dirt, all kinds of deposits, metal particles and industrial pollutions from the surface
On what surface is this product forbidden to use? ------- Cannot be used on surfaces with no absorption water, such as granite and marble ------- ------- ------- ------- it can cause corrosion in raw metals it can cause corrosion in raw metals
What characteristics does this product give to the surface?
  • Water and oil repellency
  • Anti-stain and anti-graffiti;
  • UV protection;
  • Hydrophobicity
  • Prevent erosion
  • Hydrophobicity
  • Easy to clean of glass
  • UV protection
  • Waterproof and anti-swelling
  • Hydrophobicity and dimensional stability;
  • Anti-scaling paint and wood
  • Strong hydrophobicity
  • Prevent erosion
  • Prevents salt blooming and efflorescence
  • Strong hydrophobicity
  • Prevent erosion
  • Prevents salt blooming and efflorescence
  • Removes Efflorescence and Excess Mortar
  • Cleansers of soot, grease, dirt, all kinds of deposits, metal particles and industrial
What is the appearance of this product after use?
  • Forms a micrometeric layer;
  • Does not influence breathability of substrate
  • It does not flake.
  • No layer formation and excellent depth of penetration
  • There is no color change on the surface
  • No layer formation
  • Permeability without layer formation;
  • Does not change color or stain
  • Penetrating without layer formation;
  • Penetrating and without layer formation;
  • No surface color change
  • No color change of substrate; and decompose in the environment within ten days
  • No color change of substrate; and decompose in the environment within ten days
How many meters does this product cover? Each kilogram mixed with three times the water and covers an average of about 20 square meters. Each kilo combines with 20-30 times the water and covers an average of 100 to 150 square meters depending on surface absorbability. Each liter covers 15-20 square meters. Each liter is applied for 35-25 meters of length of MDF or 5-10 square meters of raw wood or about 30 square meters of painted wood. Each liter covers about 5 to 10 square meters depending on surface absorbability Each liter covers about 8 to 15 square meters depending on the surface Each kilo cleans 3 to 5 meters. Each kilo cleans 3 to 5 meters.
How to apply the product?
  • Apply with a brush or spray. Repeat 1 or 2 times after half an hour.
  • It is recommended to see the processing section of the NFS-104 product on the site.
  • Apply with a brush or spray. Be sure to apply wet on wet and keep continue until saturated
  • It is recommended to see the processing section of the NFS-2028IMP product on the site.
  • Spray and then polish.
  • It is recommended to see the processing section of the EC-211 product on the site.
  • Apply with a brush or spray.
  • It is recommended to see the processing section of the EC-311 product on the site.
  • Apply with a brush or spray and re-apply after an hour.
  • It is recommended to see the processing section of the FARAZSIL® NFS 290 product on the site.
  • Apply with a brush or spray and must be re-applied after one to two hours and then polished.
  • It is recommended to see the processing section of the FARAZSIL® NFS 290 SUPER product on the site.
  • Apply with a brush or spray.
  • It is recommended to see the processing section of the BIOCLEAN – 331 product on the site.
  • Apply with a brush or spray.
  • It is recommended to see the processing section of the BIOCLEAN – 331PLUS product on the site.
What does this product dilute with and how much?
    Dilute 1:3 parts by weight with water For gypsum should be diluted 1:5 parts by weight with water; For painted metal surfaces should be diluted 1:2 parts by weight with water and apply one time.
For painted metal surfaces should be diluted 1:2 parts by weight with water and apply one time. No dilution (ready to use) No dilution (ready to use) No dilution (ready to use) No dilution (ready to use) No dilution (ready to use) No dilution (ready to use)
How long is the product durability? Approx. 5 years The standard test of the RILEM of this product still shows no water absorption after 10 years. Approx. 6 months to a year It is recommended to re-apply once a year. Approx. 10 years Approx. 2-5 years Cleaner is only for removing efflorescence, dirt and grime and durability is not relevant. Cleaner is only for removing soot, grease, dirt and all kinds of deposits and durability is not relevant.
What is the type of packaging?
  • Packaging is in the form of 1-kg and 8-kg buckets.
  • Package is in a quarter, one and twenty kg.
  • Package is in a quarter, one and twenty lit.
  • Package is in a quarter, one and twenty lit.
  • Package is in one, five and twenty lit.
  • Package is in one, five and twenty lit.
  • Package is in five and twenty lit.
  • Package is in five and twenty liters
Does the company provide a small sample for test and select of the product? A 50 ml concentrate is available. The 120 ml sample is available diluted and ready to use. A 50 ml is available and ready to use. A 50 ml is available and ready to use. A 50 ml is available and ready to use. A 50 ml is available and ready to use. A 250 ml sample is available. A 250 ml sample is available.
What final approval has this product received?
  • Valid nanoscale production certificate from the Presidential Nano Headquarters;
  • Penetration from Road, Housing and Urban Development Research Center;
  • Certificate of anti- efflorescence coating
  • Slurry effect certificate
  • Valid nanoscale production certificate from the Presidential Nano Headquarters;
  • Depth of penetration
  • Water vapor penetration rate;
  • Slurry effect certificate;
  • Valid nanoscale production certificate from the Presidential Nano Headquarters;
  • Valid nanoscale production certificate from the Presidential Nano Headquarters;
  • Valid nanoscale production certificate from the Presidential Nano Headquarters;
  • Valid nanoscale production certificate from the Presidential Nano Headquarter;
--------- ---------
When can the surface be tested after the application of the Nanomaterials? Do not test the surface before 48 hours to check the quality of the nano-coating. Do not test the surface before 48 hours to check the quality of the nano-coating. Do not test the surface before 48 hours to check the quality of the nano-coating. Do not test the surface before 1 week to check the quality of the nano-coating. Do not test the surface before 1 week to check the quality of the nano-coating. Do not test the surface before 1 week to check the quality of the nano-coating. Wait for the surface to dry and then see the result Wait for the surface to dry and then see the result